I-43 Series

  • PRESS-IN INSTALLATION
  • EFFECTIVE IN VIBRATORY ENVIRONMENTS
  • DIAMOND KNURL OFFERS RESISTANCE AGAINST TORQUE AND PULL OUT
  • SUITABLE FOR USE IN MOST THERMOSET PLASTICS
  • HEAD PROVIDES GREATER BEARING SURFACE

STANDARD SPECIFICATIONS

PART NUMBERTHREAD"A"
INSERT
LENGTH
"B"
INSERT
Φ
"D"
HEAD
THICKNESS
"E"
HEAD
Φ
RECOMMENDED
HOLE SIZE
(+.004/-.000)
MIN. WALL
THICKNESS
I43-02-56-155BR2-56.155.136.017.187.126.094
I43-04-40-186BR4-40.186.165.020.218.157.126
I43-06-32-249BR6-32.249.197.026.250.189.142
I43-08-32-312BR8-32.312.230.032.281.220.157
I43-10-24-371BR10-24.371.260.039.312.252.189
I43-10-32-371BR10-32.371.260.039.312.252.189
I43-14-20-497BR1/4-20.497.327.049.375.315.236
I43-14-28-497BR1/4-28.497.327.049.375.315.236
I43-516-18-497BR5/16-18.497.390.049.437.378.276
I43-516-24-497BR5/16-24.497.390.049.437.378.276

Notes:

1. Last characters of the part number define the material as follows: BR – Brass / Plain Finish.
2. Standard specifications are listed in inches. Metric specifications are listed in millimeters.
3. Additional lengths, materials and finishes are available by request. Please contact Inserts International to discuss your design preferences.
4. Recommended hole size and wall thickness to be confirmed by end user. Performance may vary for different plastics.

METRIC SPECIFICATIONS

PART NUMBERTHREAD"A"
INSERT
LENGTH
"B"
INSERT
Φ
"D"
HEAD
THICKNESS
"E"
HEAD
Φ
RECOMMENDED
HOLE SIZE
(+.1/-.0)
MIN. WALL
THICKNESS
I43-M2-3.9BRM23.93.50.434.83.22.4
I43-M2.5-4.7BRM2.54.74.20.515.54.03.2
I43-M3-4.7BRM34.74.20.515.54.03.2
I43-M3.5-6.3BRM3.56.35.00.666.44.83.6
I43-M4-7.9BRM47.95.80.827.15.64.0
I43-M5-9.4BRM59.46.60.997.96.44.8
I43-M6-12.6BRM612.68.31.259.58.06.0
I43-M8-12.6BRM812.69.91.2511.19.67.0

Notes:

1. Last characters of the part number define the material as follows: BR – Brass / Plain Finish.
2. Standard specifications are listed in inches. Metric specifications are listed in millimeters.
3. Additional lengths, materials and finishes are available by request. Please contact Inserts International to discuss your design preferences.
4. Recommended hole size and wall thickness to be confirmed by end user. Performance may vary for different plastics.